Indesit DIF-66B1-A-EU - Manuel (Page 11)

EN
11
Wash cycles
The number and type of wash cycles and options may vary depending on the dishwasher model.
Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.
Based on the different conditions of use, the wash-cycle duration and data can change.
Wash Cycle Drying Options
Wash Cycle
Duration
Water
Consumption (l/
cycle)
Energy
Consumption
(kWh/cycle)
Eco Yes No 03:10’ 11,0 1,03
Auto
Intensive
Yes No 02:00’ - 3:10’ 14 - 15,5 1,5 - 1,8
Auto
Normal
Yes No 1:30’ - 02:30’ 14,5 - 16,0 1,2 - 1,35
Rapid 40’ No No 00:40’ 9,5 0,9
Prewash No No 00:12’ 4,5 0,01
Half Load
wash
Yes No 01:20’ 12 1,15
Instructions on wash-cycle selection and detergent dosage
1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal
soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery.
27 gr/ml + 6 gr/ml** – 1 Tab
(**Quantity of pre-washing detergent)
2. Heavily soiled dishes and pans (not to be used for delicate items). 30 gr/ml – 1 Tab
3. Normally soiled pans and dishes. 27 gr/ml + 6 gr/ml** – 1 Tab
4. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab
5. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.
6. Ideal cycle for small loads of crockery with a normal soil level. 25 gr/ml – 1 Tab
Standby consumption: Left-on mode consumption: 5,0 W - Off mode consumption: 0.5 W
Notes:
Optimum performance levels when using the “Rapid 40’" cycle can be achieved by respecting the specified number of place settings.
To reduce consumption, only run the dishwasher when it is full.
Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address:
[email protected]