Indesit DPG-66B1-K-EU - Manuel (Page 11)

EN
11
Wash cycles
The number and type of wash cycles and options may vary depending on the dishwasher model.
Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.
Based on the different conditions of use, the wash-cycle duration and data can change.
Instructions on wash-cycle selection and detergent dosage
1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal
soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery.
27 gr/ml + 6 gr/ml** – 1 Tab
(**Quantity of pre-washing detergent)
2. Heavily soiled dishes and pans (not to be used for delicate items). 30 gr/ml – 1 Tab
3. Normally soiled pans and dishes. 27 gr/ml + 6 gr/ml** – 1 Tab
4. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab
5. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.
6. Large crockery. (Do not use on delicate items) 30 gr/ml – 1 Tab
Standby consumption: Left-on mode consumption: 5,0 W - Off mode consumption: 0.5 W
n.a. - non applicable
Wash Cycle Drying Options
Wash Cycle
Duration
Water
Consumption
(l/cycle)
Energy
Consumption
(kWh/cycle)
1. Eco Yes No 03:10’ 11 1,03
2. Auto Intensive Yes No 02:00’ - 03:10’ 14,0 - 15,5 1,5 - 1,8
3. Auto Normal Yes No 01:30’ - 02:30’ 14,5 - 16,0 1,2 - 1,35
4. Rapid 40’ No No 00:40’ 9,5 0,9
5. Prewash No No 00:12’ 4,5 0,01
6. Extra No No 01:00’ 11,0 n.a.
Notes:
Optimum performance levels when using the “Rapid 40’” cycle can be achieved by respecting the specified number of place set-
tings.
To reduce consumption, only run the dishwasher when it is full.
Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address:
[email protected]