Samsung DV520AEP-XAC - Manuel (Page 23)

installing your dryer _23
DOOR REVERSAL
1. Unplug the power cord.
2. Remove two door hinge
screws.
3. Lift the door and remove
it.
8. Remove a screw from the
door hinge.
The screw is for pre-
fixing the door to the
frame front.
4. Remove two screws from
the frame front.
9. Reassemble the screw in
the other hole.
5. Remove the two screws
from the opposite side of
the door hinge.
10. Place the door on the
other side and reattach it
to the dryer.
6. Remove two screws from
the holder lever.
11. Reattach the holder lever.
7. Reassemble two screws
on inside holes.
12. Reattach the screws in
the remaining holes.
01 installing your dryer
DV520AE-02836B-03_EN.indd Sec2:23 DV520AE-02836B-03_EN.indd Sec2:23 2012-10-11 6:00:16 2012-10-11 6:00:16