Samsung DVD-R135-XAA - Manuel (Page 24)

C
onnecting & Setting Up
24 - English
Step 4 : Connecting HDMI/DVI to a TV
If your TV has a HDMI/DVI input, connect HDMI/DVI cable to a TV. You will enjoy the best quality images and sounds.
Connecting to a TV with HDMI Jack
Using the HDMI- HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of
your TV.
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV
screen.
HDMI OUT
■ To watch through the HDMI output, set the digital
audio output to PCM.(See page 34~35)
■ Depending on the HDMI device(TV/HDMI Receiver)
you use, audio may not be supported. If TV does
not support Dolby digital/DTS, Audio output is not
available when you set Digital output as Bitstream
or select DTS On in Audio setup menu. In this case,
set the digital audio ouput to PCM or DTS Off.
Caution
01049B-R135-XAC-ENG-14-29 2006.3.15 4:43 PM Page 24