Alpine HCE-100XM - Manuel (Page 10)

9
-EN
Detour Based On
When you select “Detour” in the Traffic Incident List screen
or press the DETOUR key on the remote controller, the
Navigation shall allow you to detour your route based on the
setting you have chosen.
Setting item: Detour Based On
Setting content: Traffic (Initial setting) / Distance
Traffic: The system shall perform a detour by
considering traffic congestion reported
along the route within 30 miles ahead of the
vehicle.
Distance: The system shall perform a detour by
considering distance selected by the User
only.
• At present traffic information is not available for all cities.
Please contact XM for updated information on traffic
coverage for your area.
Reference
If this Message Appears
Various messages are displayed on the screen during
operation. In addition to the messages telling you the current
status or providing guidance for the next operation, there are
also the following error messages. If one of these error
messages is displayed, carefully follow the instructions in the
solution column.
Check Antenna.
• The XM antenna is not connected to this unit.
- Check whether the XM antenna cable is attached securely to
this unit, then turn the ignition off and on again.
Specifications
External dimensions
Width 160 mm (6-1/4")
Height 40 mm (1-9/16")
Depth 120 mm (4-3/4")
Weight 610 g (1lb 6 oz)