GE GSD3300DBB - Manuel (Page 9)

Start (Models with a dial)
Slowly turn the Dial to the STArT or On position, or the selected cycle. Don’t turn it past the STArT,
On or cycle position; you could accidentally miss a prewash.
There is a time delay between start-up and water fill so you will not hear any wash action right away.
n Latch the door to begin the cycle.
9
Co
ns
um
er
S
up
po
rt
Tro
ub
les
ho
ot
in
g T
ip
s
O
pe
ra
tin
g I
ns
tru
cti
on
s
Sa
fe
ty
In
str
uc
tio
ns
Operation of models with cycle dial
GEAppliances.com
rinse Only
For rinsing partial loads that will be washed later. donotusedetergent.
Make sure HEATEd dry is not selected. Slowly turn the Dial to rInSE Only.
Be sure the door is unlatched. Latch the door to start the cycle. 4
3
2
1
Be sure the door is unlatched.
Slowly turn the Dial to SHOrT WASH,
lIGHT WASH or WATEr SAvEr.
Latch the door to start the cycle. 3
2
1
plate Warmer or drying
Load clean dishware to be warmed.
Select HEATEd dry On.
Be sure the door is unlatched.
Slowly turn the Dial to plATE WArMEr or
dryInG.
Latch the door to start the cycle. 5
4
3
2
1
Hot Start or Hot prestart Option
Preheats wash water.
Select the HOT STArT or HOT prESTArT
cycle and any other option on the push
button pad.
Be sure the door is unlatched.
Slowly turn the Dial to HOT STArT or
HOT prESTArT.
Latch the door to start the cycle.
4
3
2
1
For warming clean dishes and serving plates. This cycle will take approximately 39 minutes.
Short Wash or light Wash or Water Saver
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.