Audiovox FR-530 - Manuel (Page 10)

128-5774A 128-5774A 128-5774A 128-5774A 128-5774A
10 of 32 10 of 32 10 of 32 10 of 32 10 of 32
If pressed for more than 2 seconds, you can continuously monitor
channel activity. Press again, momentarily, and monitoring is disabled.
Function Select Button (12) Function Select Button (12) Function Select Button (12) Function Select Button (12) Function Select Button (12)
Pressing this button will allow selection of frequency channels as
well as selection of the various unit functions. Each press permits
selection of the desired channel (1–14), beep tone, scan, VOX and
Dual Watch mode. This button also activates the Key lock feature
when pressed and held for more than 2 seconds. The Key lock icon
(
) appears on the display. To unlock this function, press and hold
the function button for 2 seconds.
Channel Selection Channel Selection Channel Selection Channel Selection Channel Selection
Press function button once or until two digit channel display flashes.
Press Up or Down buttons (10, 9) to select desired channel (1–14).
Beep Confirmation T Beep Confirmation T Beep Confirmation T Beep Confirmation T Beep Confirmation Tones ones ones ones ones
Whenever the Up/Down or function select buttons are pressed, the
speaker will sound a beep tone to confirm each press, provided
the key tone feature is enabled. To disable the key tone, press
Function button until the Beep Tone icon flashes. Then press Up
or Down buttons until the icon disappears. No beep tones should
be heard. To enable the key tone, proceed as before, until Beep
Tone icon appears flashing. Then press Up or Down button. Key
tone icon remains displayed and beep tone is heard. When increasing
the volume or channel number, the tone will be higher than when
decreasing the volume or channel number.
FUNCTIONS FUNCTIONS FUNCTIONS FUNCTIONS FUNCTIONS
-10-