LG WM3431HS - Manuel (Page 15)

15
ow to use washer H
1) Drying Automatic guide
2) Drying time guide
• Drying options are easily selected with the Dry
button.
• For most even drying , make sure all articles in the
clothes load are similar in material and thickness.
• Do not overload dryer by stuffing too many articles
into drum. Items must be able to tumble freely
• If you open door and remove load before dryer has
finished its cycle, remember to press the
Start/Pause button.
• By pressing the Dry button, you can select
• Use your Automatic Cycles to dry most loads.
Electronic sensors measure the temperature of the
exhaust to increase or decrease the drying
temperature for faster reaction time and tighter
temperature control.
• Recommended Dry selection according to fabric type:
a) Perm Press - Low Temp.
b) If clothes are to be ironed - Less
c) Cotton/Towels - Normal
d) Diapers - More
The estimated drying time varies from the
actual drying time with an Automatic.
The type of fabric, size of the load, and the
dryness selected affect drying time.
• By pressing the Dry button, the drying time can
be selected.
• Timed dry can last up to 150 min. When
selecting Dry only, drying will start after
spinning.
• These drying times are given as a guide to help
you set your dryer for manual drying. Drying
times can vary greatly depending on dampness,
room temperature and type of fabric. Your own
experience will be your best guide.
- Do not tumble dry woolen articles. Pull them to
their original shape and dry them flat.
Woolen Articles
- Some woven and loopknit materials may shrink,
by varying amounts, depending on their quality.
- Always stretch them out immediately after
drying.
Woven and Loopknit Materials
- Do not overload your dryer.
- Take out permanent press articles as soon as
the dryer stops to reduce wrinkles.
Permanent Press and Synthetics
- Always check the manufacturer's instructions.
Fiber or Leather Materials
- Always check the manufacturer's instructions.
Baby clothes and Night Gowns
- Do not dry any items made from or containing
rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Rubber and Plastics
- Do not dry fiberglass articles in your dryer. Glass
particles left in the dryer could be picked up by
your clothes the next time you use the dryer and
irritate your skin.
Fiber glass
➔
➔
➔
Normal
Low Temp. Less
Off
➔ ➔
More Time
9. Dry
• Your dryer can handle a load of up to 9 lbs.
(4 kg) dry weight of articles.
• When drying cycle is completed, (Cool Down)
is displayed on the Multi display.
• Cool Down is set automatically when the drying
cycle is complete.
• If clothes are not removed promptly when the
drying cycle ends, wrinkles can form.
• The Cool Down feature periodically tumbles,
rearranges and fluffs the load to avoid wrinkles for
up to 4 hours.
• The message will continue to display until the
clothes are removed or the Start/Pause button is
pressed.