Installation, 1 replacing the lamp, 2 closing the door – Electrolux ERF4112AOW Manuel d'utilisation

Page 14: 1 positioning

Advertising
background image

Problem

Possible cause

Solution

The temperature in
the refrigerator is
too warm.

There is no cold air circu-
lation in the appliance.

Make sure that there is cold
air circulation in the appli-
ance.

Large quantities of food to
be cooled were put in at
the same time.

Insert smaller quantities of
food to be cooled at the
same time.

The appliance does
not operate.

The appliance is switched
off.

Switch on the appliance.

The mains plug is not con-
nected to the mains sock-
et correctly.

Connect the mains plug to
the mains socket correctly.

The appliance has no
power. There is no voltage
in the mains socket.

Connect a another electrical
appliance to the mains
socket. Check fuse. Con-
tact a qualified electrician.

The lamp does not
work.

The lamp is defective.

Refer to "Replacing the
lamp".

The door has been open
to long.

Close the door.

Door interferes with
ventilation grill.

The appliance is not level-
led.

Refer to "Levelling".

Misaligned door.

The appliance is not level-
led.

Refer to "Levelling".

As much as the advice does not lead to result, call the nearest brand-mark service.

7.1 Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service Cen-
ter .

7.2 Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to
"Installation".

3.

If necessary, replace the defective
door gaskets. Contact the Service
Center.

8. INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.

8.1 Positioning

Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:

14 www.electrolux.com

Advertising