Electrolux ERF3867SOX - Manuel (Page 7)

– for the fridge: +4°C
To switch off the function:
1. Press the Mode button until the cor-
responding icon appears.
2. After a few seconds The EcoMode in-
dicator goes off.
The function switches off by se-
lecting a different set temperature.
2.8 Extra Humidity Mode
If you need to increase the humidity in the
refrigerator, we suggest activating the Ex-
tra Humidity function.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
2. After a few seconds The Extra Hu-
midity indicator goes on.
To switch off the function:
1. Press the Mode button until the cor-
responding icon appears.
2. After a few seconds The Extra Hu-
midity indicator goes off.
2.9 ShoppingMode
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the ShoppingMode to chill the products
more rapidly and to avoid warming the
other food which is already in the refriger-
ator.
To switch on the function:
1. Press the ShoppingMode button.
The ShoppingMode indicator ap-
pears.
The ShoppingMode shuts off automatical-
ly after approximately 6 hours.
To switch off the function before its auto-
matic end:
1. Press the ShoppingMode button.
2. The ShoppingMode indicator goes
off.
Alternative method:
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
After a few seconds the Shopping-
Mode indicator goes on.
To switch off the function before its auto-
matic end:
1. Press the Mode button until the cor-
responding icon appears.
2. After a few seconds the Shopping-
Mode indicator goes off.
The function switches off by se-
lecting a different fridge set tem-
perature.
2.10 Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door
open alarm conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing any button.
2.11 Selecting and dispensing
water
• Before dispensing water, select either
Still cold water, Low sparkling water or
High sparkling water.
The actual choice is indicated by the in-
dicator.
• Water is dispensed by pressing a glass
or other container towards the flap.
• Draw back the glass or container to
stop the water flow and the indicator
goes off after a few seconds.
Any water that drips or is spilled is collec-
ted in the drip tray below the water dis-
penser. The drip tray can be detached
and emptied when necessary.
2.12 Lighting
The water dispenser lighting illuminates
automatically when water is dispensed.
2.13 For continuous lighting
1. Press the Light button and the lighting
goes on.
Brightness is now about 20% until the
dispenser is used.
2.14 Switch off the lighting
1. Press the Light button and the lighting
goes out.
ENGLISH 7