Bosch SPV5ES53UC - Manuel (Page 5)

3
Tools and Materials Needed
Hammer Hole Saw Pipe Wrench Adjustable Wrench
Tape Measure Slot Screwdriver Phillips Screwdriver Torx T-20 Screwdriver
Wire Cutter Wire Stripper Ø 2 mm (1/16 in) Drill Level
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1
ground, insulated copper conductors rated 75°C or higher
Hot Water Supply Line - Minimum 3/8Ǝ O.D. copper tubing or
metal braided dishwasher supply line
Shut-off valve and fittings appropriate for hot water supply
line (copper tubing/compression fitting, or braided hose
UL listed conduit connector or strain relief is required if you
attach the field wiring directly to the terminal block