American Comfort ACW100 - Manuel (Page 9)

When the power cord is connected to the electrical outlet, the unit is ready for
operating after a short buzzing sound.
1. ON/OFF
Press the
ON
/
OFF BUTTON
to switch on. The on/off indicator will turn green.
If the unit does not turn on, press the top reset button on the plug. The green light
on the plug will indicate the unit is receiving power. At the same time the on/off
indicator will turn green.
When the cooler is running, press the ON / OFF BUTTON to switch it off.
2. Cooling
If you choose to have your unit operate with only the dehumidification function,
press the
BUTTON
to select the level of cooling, the corresponding
LED
will lit:
HI
(orange) for strong cooling or
LO
(green) for mild cooling.
3. Dehumidifying |
Press the
BUTTON
to select the required level of dehumidification, the louvre will
close and the unit will start to dehumidify, the corresponding
LED
will lit:
LO
(green) for mild dehumidification or
HI
(orange) for strong dehumidification.
When the relative humidity in the room is high and you want to dry the room quickly,
use the
HI
dehumidification.
4. Fan speed
Press the
BUTTON
to select the required fan speed, the corresponding
LED
will lit:
-
LO
(green) for low speed or -
HI
(orange) for high speed.
5. Timer
Press the
BUTTON
to select for how many hours the cooler should continue to
operate: 2, 4 or 8 hours, the corresponding
LED
(2
H
, 4
H
or 8
H
) will turn green.
The unit will stop working once the selected time has run down.
When the compressor is shut down due to a power outage, the timer needs to be
reset. But if the compressor is stopped due to water tank full condition or
defrosting, the timer setting will remain as set
5 3 2 1 4
Operation
7
6