American Comfort PC14E - Manuel (Page 17)

Troubleshooting
15
Problem Cause Solution
The Unit Does
Nothing No power supply. Make sure outlet works.
Be sure Green Light is on (L.C.D.I. Plug)
Press Re-start button.
Is the LCD light is fl ashing? Drain the Unit.
Timer Function Set. Deactivate the Timer Function.
The Air Conditioner
Does Not Function
Properly Windows or doors are
open. Close doors and windows.
The fi lter is dirty. Clean or replace fi lter.
Air inlet or air outlet is
blocked. Remove blockage.
Room temperature lower
than the selected value. Lower temperature selected.
The overheat protection is
activated. Wait 3 minutes until temperature has
decreased, then turn on again.
The Unit is Noisy Unit is not standing on a
level surface. Place on an even surface.
The Remote
Control Does Not
Function Distance too great. Make sure the remote is aimed at
the control panel.
Remote control signal not
detected by control panel. Control is aimed at the control panel.
Batteries are dead. Replace the batteries.
Never try to repair or dismantle the air conditioner yourself. Tampering with the unit may
result in the loss of warranty and can endanger the user and property.
If you have any questions regarding the operation of the Plasma Cool
please contact Arbaco at 1-877-613-1800
REPLACEMENT FILTERS:
To purchase Replacement Filters for this unit, contact Arbaco at
1-877-613-1800 and request model number PLASMA COOL PC14E
If this product is defective or not working properly,
please DO NOT return to your retail store.
Please contact Arbaco for service or technical assistance
Arbaco Ltd.
www.plasmacoolstore.com