American Comfort ACW500CH - Manuel (Page 11)

Cooling Mode
· After machine turns on, default value is cooling mode with 72ºF and low fan speed.
· Press “MODE” to select cooling mode, cooling mode indictor turns on .
· Press “UP” or “DOWN” to adjust temperature (from 60ºF to 90ºF).
· Press “FAN” to select fan speed (low, medium, high)
Heating Mode
· Press “MODE” to select heating mode, heating mode indicator turns on (only for cooling and heating model).
· Press “UP” or “DOWN” to adjust temperature.
· Press “FAN” to select fan speed (low, medium, high)
Fan Mode
· Press “MODE” to select fan mode, fan mode indicator turns on .
· Press “FAN” to select fan speed (low, medium, high)
· Temperature and sleeping function cannot be setup.
Timer Mode
· Under standby mode, press “TIMER” to setup the power-on time,
press “UP” and “DOWN” to adjust the timer (from 1 to 24 hours). Timer indicator turns on.
· Under power-on mode, press “TIMER” to setup power-off timer.
Press “UP” and “DOWN” to adjust the timer (from 1 to 24 hours). Timer indicator turns on.
Sleeping Mode
· Press key “SLEEP” enter into sleeping mode, default value of fan speed is low.
· When sleeping mode turns on , under cooling mode, the one hour later, setting temperature will go up 1º, the
second one hour later, setting temperature will go up another 1º, and then keep the same; under heating mode,
the fi rst one hour later, setting temperature will go down 1º, the second one hour later, the setting tempera-
ture will go up another 1º and then keep the same .
· Sleeping mode is invalid under dehumidifying and fan mode.
Under water full, machine standby and mode conversion, sleeping mode will be cancelled .
Compressor Protection
· Three minutes later after power on / restart, compressor starts to run.
Operation
9
TiO2/Ion Timer Sleep Up Down Fan Mode Power