Setting the keyboard country code, Figure 3.8: keyboard box – Avocent 1400 Manuel d'utilisation
Page 34
24 AutoView 1400/1500/2000 Installer/User Guide
Setting a Screen Delay Time allows you to complete a soft switch without the OSCAR interface
displaying. To perform a soft switch, see Soft switching in this chapter.
Setting the keyboard country code
The AutoView 1400/1500/2000 switch can be configured to recognize a variety of keyboards. The
default setting is for a US keyboard. If you wish to change this configuration, the Keyboard dialog
box allows you to select a different keyboard country code.
NOTE: Ensure that the country code selected on your Sun server matches the Keyboard Country Code selected
in the OSCAR or your keyboard will not be mapped correctly.
Figure 3.8: Keyboard Box
To change the keyboard country code:
1.
Press
Print Screen
to launch the OSCAR interface. The Main dialog box will appear.
2.
Click Setup-Keyboard. The Keyboard dialog box displays.
3.
Select your desired keyboard country code and click OK.
4.
A Keyboard Warning dialog box will appear to confirm your changes.