Nova-Tech Floc-Tester ET 730 - Manuel (Page 6)

6 Floc-Tester_ET730_1 06/2009
EN General notes
Safety Instructions
Before using the unit, please read this operating manual carefully .
Do not dispose of this equipment as urban waste .
In order to prevent possible risk of electric shocks, fire and personal injury when the unit is
being used, basic safety measures must always be taken, including:
Do not turn the instrument on before positioning the beakers (thus protecting •
the blades) . Ensure that the power switch is turned to “0” (OFF) before
removing the beakers containing the stirring liquid .
Check that the rating of external power supply corresponds to the rating of the •
electric line .
Do not use the unit if it is not working correctly . In case of malfunctioning,
contact Orbeco-Hellige, Inc .
Personal protective equipment must be compatible with the possible risks posed by the
material being processed and the glass parts .
Follow the cleaning instructions described in this manual .
This unit must only be used for laboratory applications
The manufacturer declines all responsibility for any use of the unit that does not comply
with these instructions .
This unit has been designed and produced in compliance with the following standards .
Safety requirements for electrical apparatus for: •
Measurement and control and for laboratory use CEI EN 61010-1 •
Electrical equipment for laboratory use UL 3101-1
General requirement – Canadian electrical code CAN/CSA-C22 .2
Note
The manufacturer is committed to constantly improving the quality of the products and •
reserves the right to modify the characteristics without prior notice .