Metropolitan Vacuum Cleaner B3-CD Air Force Blaster Motorcycle Dryer - Manuel (Page 5)

***READ ALL INSTRUCTIONS BEFORE USE***
METRO AIRFORCE BLASTER
Model B3-CD
The METRO AIR FORCE BLASTER is designed to cut drying time by as
much as 75%. The BLASTER provides gentle heat and dramatic air
velocity to dry cars or motorcycles quickly and thoroughly.
1. Insert the grounded Power Supply Cord into a grounded outlet.
IMPORTANT: PRODUCT MUST BE GROUNDED.
WARNING: INPROPER CONNECTION OF THE EQUIPMENT GROUNDING
CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK!
2. Move car/motorcycle to a dry area to eliminate risk of electric shock.
3. Fit the 10 ft. by 1 ½” Hose (D) over the steel tube protruding from the front end
cap of the power unit. Tighten the adjustable clamp to keep the hose securely on the
dryer.
4. Start the dryer by pushing the On/Off Switch (B) from left to right. Dry the
vehicle from top to bottom.
5. Attach or remove the Neoprene Nozzle, or other attachments from the hose to
control the air velocity.
6. For even greater air flow, the hose cuff on the blower end screws off in a counter
clockwise direction and screws back on in a clockwise direction.
SERVICE
NORMAL MAINTENANCE, SUCH AS MOTOR BRUSH REPLACEMENT, CAN BE MADE AT
YOUR LOCAL SERVICE SHOP. MOTOR BUSH LIFE IS APPROXIMATELY 500 HOURS.
BRUSHES SHOULD BE CHECKED BETWEEN 200-250 HOUR INTERVALS. SEE ENCLOSED
INSTRUCTIONS. FILTER LIFE IS DEPENDENT ON USAGE. CHECK AND REPLACE WHEN
REQUIRED.
CAUTION: DO NOT DROP THIS MACHINE. MOTOR MALFUNCXTION CAUSED BY
PRODUCT BEING DROPPED IS NOT COVERED UNDER WARRANTY.
DELIBERATELY MADE BETTER IN THE U.S.A®