MAX GS732C - Manuel (Page 10)

10
2. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
NOTE: The triangle symbol marked as "V" following its tool serial number indicates that safety yoke is equipped with this tool.
2. TOOL SPECIFICATIONS 3. FASTENER SPECIFICATIONS
4. TECHNICAL DATA
1 NOISE
A-weighted single-event ------ LWA, 1s, d 103.38 dB
sound power level
A-weighted single-event ------ LpA, 1s, d 97.34 dB
emission sound pressure
level at work station
These values are determined and documented in accordance to EN12549 : 1999.
2 VIBRATION
Vibration characteristic value = 6.00 m/s
2
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system when sing the tool.
An influence to the hand-arm-system when using the tool will for example depend on the gripping force, the contact pressure force, the
working direction, the workpiece, the workpiece support.
1 Cylinder Cap Unit
2 Fuel Cap
3 Housing
4 LED
5 Trigger
6 Battery
7 Hook
8 Nail Stopper
9 Contact Arm
0 Follower
a Follower Holder
b Magazine
c Magazine Foot
d Pack Cap
e Terminal Block
f MAX JP606H battery
g Battery Setting Hollow
h Jack
i Power Cord
j MAX JC610M charger
k Power Plug
l AC Adapter
PRODUCT NO. GS732C LT
HEIGHT 14-3/8" (365 mm)
WIDTH 4-7/8" (124 mm)
LENGTH 17-1/8" (435 mm)
WEIGHT 8.1 lbs. (3.7 kg)
(including Fuel Cell and Battery)
LOADING CAPACITY 42 pins
BATTERY MAX JP606H battery
BATTERY CAPACITY 6V DC, 1.5 Ah
CHARGER MAX JC610M charger
POWER SOURCE 100-240V AC, 50 or 60 Hz
POWER CONSUMPTION
(Rated output) 8VA (10V 800mA)
CHARGING TIME 150 minutes at maximum
ACCESSORIES Safety Glasses, Carrying case, Bat-
tery, Charger, Jam clear tool
PRODUCT NO. GS732C LT
PIN LENGTH 1/2" to 1-1/4" (12 to 32 mm)
SHANK DIAMETER .102", .120", .145"
(2.6 mm, 3.0 mm, 3.7 mm )
SHANK TYPE Smooth, Step
HEAD DIAMETER .252" (6.4 mm)
GS738C_USA.book 10 ページ ２０１１年８月２４日 水曜日 午後５時０分