Asus M3A78 - Manuel (Page 71)

ASUS M3A78 2-25
Bank Interleaving [Auto]
Options de configuration : [Disabled] [Auto]
Channel Interleaving [Disabled]
Options de configuration : [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
MemClk Tristate C3/ATLVID [Disabled]
Options de configuration : [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Options de configuration : [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Options de configuration : [Auto] [Always]
Power Down Enable [Enabled]
Options de configuration : [Disabled] [Enabled]
ECC Configuration
ECC Mode [Disabled]
Permet de régler le mode ECC. Options de configuration : [Disabled] [Basic]
[Good] [Super] [Max] [User]
Alternate VID [Auto]
Spécifie le VID alternatif en mode d’opération faible. Configuration options:
[1.150V] [1.125V] [1.100V] [1.075V] [1.050V] [1.025V] [1.000V] [0.975V] [0.950V]
[0.925V] [0.900V] [0.875V] [0.850V] [0.825V] [0.800V] [Auto]
Advanced
ECC Configuration
ECC Mode [Disabled]
DRAM ECC Enable [Disabled]
DRAM SCRUB REDIRECT [Disabled]
4-Bit ECC Mode [Disabled]
DRAM BG Scrub [Disabled]
Data Cache BG Scrub [Disabled]
L2 Cache BG Scrub [Disabled]
L3 Cache BG Scrub [Disabled]
Set the level of ECC
protection. Note:
The ‘Super‘ ECC mode
dynamically sets the
DRAM scrub rate so all
of memory is scrubbed
in 8 hours.
Primary Display Adapter [GFX-GPP-PCI]
Options de configuration : [GFX0-GPP-IGFX-PCI] [GPP-GFX0-IGFX-PCI]
[PCI-GFX0-GPP-IGFX] [IGFX-GFX0-GPP-PCI]