Asus Crosshair IV Extreme - Manuel (Page 106)

ROG Crosshair IV Extreme 3-23
3.5.2 Chipset
Le menu Chipset vous permet de modifier les paramètres avancés du chipset.
Choisissez un élément et appuyez sur <Entrée> pour afficher le sous-menu.
Crosshair IV Extreme BIOS Setup
Advanced
Nrothbridge Chipset Settings
DRAM Controller Configuration
ECC Configuration
Primary Display Adapter [PCI-E]
IOMMU [Disabled]
DRAM Controller Configuration
Crosshair IV Extreme BIOS Setup
Advanced
DRAM Controller Configuration
Channel Interleaving [Auto]
MemClk Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
DCT Unganged Mode [Always]
Power Down Enable [Disable]
Channel Interleaving [Auto]
Options de configuration : [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
MemClk Tristate C3/ATLVID [Disabled]
Options de configuration : [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Options de configuration : [Disabled] [Enabled]
DCT Unganged Mode [Always]
Options de configuration : [Auto] [Always]
Power Down Enable [Disabled]
Options de configuration : [Disabled] [Enabled]
ECC Configuration
Crosshair IV Extreme BIOS Setup
Advanced
ECC Configuration
ECC Mode [Disabled]
DRAM ECC Enable [Disabled]
DRAM SCRUB REDIRECT [Disabled]
4-Bit ECC Mode [Disabled]
DRAM BG Scrub [1.31ms]
Data Cache BG Scrub [Disabled]
L2 Cache BG Scrub [Disabled]
L3 Cache BG Scrub [Disabled]
Set the level of ECC
protection. Note:
The ‘Super‘ ECC mode
dynamically sets
the DRAM scrub rate
so all of memory is
scrubbed in 8 hours.