Asus P3-PE5 - Manuel (Page 7)

7 Quick Installation Guide
English
1. Remove the metal cover
opposite the slot that you
intend to use.
. Insert the card connector to
the slot, then press the card
firmly until it fits in place.
Installing an expansion card
Installing an optical drive
1. Drive a screw on the top right
screw hole on both sides of
the drive.
. Connect the IDE and audio
cable at the back of the drive.
. Push the drive all the way into
the bay until the drive lock clicks.
4. Connect a 4-pin power plug
from the power supply unit to
the power connector at the
back of the drive.
Installing a SATA hard disk drive
1. Drive two screws with rubber
washers on both sides of the
drive.
. Connect the SATA signal and
power plug at the back of the
drive.
Power cable and
plug
Signal cable and
plug
Rubber washer