Factory Direct Hardware Hansgrohe 14801 Allegro E - Manuel (Page 4)

4
Install the handle
Install the handle screw on the cartridge stem.
Tighten only 4 turns.
Place the handle over the stem and handle screw.
Press it firmly into place.
Use a 4 mm Allen wrench to finish tightening the
screw.
Install the screw cover.
User Instructions
Push the handle to the right to turn the water on. Push it back to the left to turn the water off.
Swivel the handle forward for cooler water, backward for warmer water.
If the flow of water diminishes, remove and clean the aerator.
Faucet “Lay Down” Function
To provide clearance for opening a window, or for
ease of cleaning, the faucet can be laid down on
the counter without uninstalling it. Pull up on the
faucet body, then gently lay the faucet down on
the countertop. Do not pull the faucet by the neck!
When replacing the faucet, make sure that the pin
on the bottom of the faucet goes into the hole on
the base. Push the faucet down firmly against the
base.
English