Factory Direct Hardware Hansgrohe 04167 Manuel d'utilisation

Page 2

Advertising
background image



Installation Considerations

For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-

sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure

that you have all tools and supplies needed to complete the installation.
The high temperature limit stop may be reset, if desired.

Technical Information

Recommended water pressure

14.7 - 7.5 psi

Recommended hot water temp.

10 - 140 F*

Max. hot water temp

165F*

Hole size in mounting surface

1-1/4”

Max. mounting surface depth

1 5/8”

Flow rate

. gpm

M3 Cartridge with high temperature limit stop
3/8” supply hoses - requires 3/8” compression fitting (not included)

*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.

Solaris² E

04167XX0

Allegro² E

04180XX0

Metro² E

04193XX0

Single Control Lavatory Faucet

Solaris² E 04167XX0

Allegro² E

04180XX0

Metro² E

04193XX0

English

Advertising