Velleman projects VMB1TS Short user manual - Manuel (Page 3)

3
ENGLISH
1. Enter a room name or label for each sensor
2. Monitor the temperature from each room or sensor
3. Change the temperature in each room
4. Set a week/day program for temperature control in each room
5. Create temperature “zones” (upstairs, downstairs … ) for easy of use
6. Activate a temporary (sleep) temperature on each sensor
7. Activate comfort/day/night/anti freeze temperature on each sensor
8. Check the temperature (min/max) history and heating time for each room
9. Set a temperature alarm (too high and too low) for each sensor
10. Receive a preset temperature alarm on the controller for a certain sensor and activate a relay contact
3. What can I do with this system?
A small heating installation will consist of:
Controller type VMB1TC to set up your system
One or more temperature sensors VMB1TS to measure the temperature in each room.
Relay module to drive the heating or air-conditioning
12Vdc power supply and 4 wire cable to interconnect the modules
4. What to install?
5. Hint
MORE INFORMATION IN THE TEMPERATURE CONTROLLER MANUAL VMB1TC
Install the controller in the room where you want to control or monitor the room temperatures. Install the controller at eyesight
level. More then 1 controller can be used, but only 1 controller can have a week/day program.
Install the sensors away from sunlight or heating sources
3
ENGLISH
1. Enter a room name or label for each sensor
2. Monitor the temperature from each room or sensor
3. Change the temperature in each room
4. Set a week/day program for temperature control in each room
5. Create temperature “zones” (upstairs, downstairs … ) for easy of use
6. Activate a temporary (sleep) temperature on each sensor
7. Activate comfort/day/night/anti freeze temperature on each sensor
8. Check the temperature (min/max) history and heating time for each room
9. Set a temperature alarm (too high and too low) for each sensor
10. Receive a preset temperature alarm on the controller for a certain sensor and activate a relay contact
3. What can I do with this system?
A small heating installation will consist of:
Controller type VMB1TC to set up your system
One or more temperature sensors VMB1TS to measure the temperature in each room.
Relay module to drive the heating or air-conditioning
12Vdc power supply and 4 wire cable to interconnect the modules
4. What to install?
5. Hint
MORE INFORMATION IN THE TEMPERATURE CONTROLLER MANUAL VMB1TC
Install the controller in the room where you want to control or monitor the room temperatures. Install the controller at eyesight
level. More then 1 controller can be used, but only 1 controller can have a week/day program.
Install the sensors away from sunlight or heating sources