Troubleshooting – Whirlpool GJC3034H Manuel d'utilisation

Page 12

Advertising
background image

Troubleshooting

POSSIBLE CAUSE

The unit is not wired into
a live circuit with proper
voltage.

A household fuse has blown
or a circuit breaker has
tripped.

A household fuse has blown
or a circuit breaker has
tripped.

You are not setting the control
knobs correctly.

You are not pushing in before
turning.

The cooktop is not level.

The pan used is not the
correct type or size.

Cookware does not fit
the surface cooking area
being used.

SOLUTION

Wire the unit into a live circuit with
proper voltage. (See separate
Installation Instructions.)

Replace household fuse or reset
circuit breaker.

Replace household fuse or reset
circuit breaker.

Push control knobs in before turning
to a setting.

Push control knob(s) in before turning
to a setting.

Level cooktop. (See separate
Installation Instructions.)

Refer to a reliable cookbook for
recommended pan type and size.

Pan should be the same size or
slightly larger than surface cooking
area being used.

PROBLEM

Nothing will
operate

The surface
cooking areas
will not operate

Control knob(s)
will not turn

Cooking
results are
not what
you expected

You can solve many common cooktop problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve your problem without outside
help. If the suggestions do not work, see “Requesting Assistance or Service” on page 13
(in the U.S.A.), or on page 14 (in Canada).

12

3192798v07c21 5/17/99 11:12 AM Page 12

Advertising
Ce manuel est liée aux produits suivants: