Whirlpool 400 - Manuel (Page 17)

17
Using the delay wash cycle
Use 4 Hour Delay Start to run the dish-
washer during off-peak hours to reduce
energy usage or to reduce daytime heat
buildup in your home.
1. Close door firmly until it latches.
2. Press 4 Hour Delay Start. The indicator
will glow red.
3. Press a Cycle pad. The Delay Start
countdown begins when you
press the Cycle pad. If you
don’t press a Cycle pad within
30 seconds, the Delay Start
indicator turns off.
4. If desired, press one or more Option
pads. The 4 Hour Delay Start
indicator stays on until the
wash cycle begins.
NOTES:
• Press 4 Hour Delay Start anytime during
the delay period to start
dishwasher immediately.
• Press Cancel/Drain to cancel the delay
cycle. The 4 Hour Delay Start
indicator will turn off. Press new
Cycle and Option pads.
• You can add items to the load anytime
during the delay countdown. After adding
items, close the door firmly until it latches.
The delay countdown will not continue if
the door is not latched.
S E T T I N G T H E C O N T R O L S
4 HOUR 4 HOUR
DELAY
START
4 HOUR 4 HOUR
DELAY
START
CANCEL
DRAIN