Whirlpool WGD9750WW - Manuel (Page 5)

QUICK START GUIDE
WARNING: To reduce the risk of fire electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
This Use and Care Guide covers several different models. Your dryer may not have all the cycles and features described.
USING AUTOMATIC CYCLES
Automatic Cycles automatically match
the cycles setting to the type of load and
adjust drying time for optimal performance.
See the Cycles information on the following
pages for more details on each cycle.
1. Clean lint screen.
2. Place laundry in the dryer. Shut the door.
3. Press POWER.
4. Select an AUTOMATIC Cycle.
5. Select the Options feature, if desired.
6. Press and hold START to begin.
To make changes during an Automatic Cycle:
1. Press PAUSE/CANCEL.
2. Select DRYNESS LEVEL or Option.
3. Press and hold START to begin.
NOTE: For the Sanitize Cycle, to ensure sanitization, do not
interrupt the cycle.
USING STEAM CYCLES
Steam Cycles use water and heat to reduce
wrinkles and odors in dry items.
1. Press POWER.
2. Select a Steam Cycle. For the Quick Refresh Cycle, select
the desired Number of Garments.
3. Press and hold START to begin.
Stopping Your Dryer
To stop your dryer at any time
Press PAUSE/CANCEL twice, open the door, or Press
the POWER button.
Pausing or Restarting
To pause the dryer at any time
Open the door or press PAUSE/CANCEL once.
To restart the dryer
Close the door and press and hold START button until
dryer starts.
USING MANUAL CYCLES
Use Manual Cycles to set a drying
time and temperature. See the
Cycles information on the following
pages for detail on each cycle.
1. Clean lint screen.
2. Place laundry in the dryer. Shut the door.
3. Press POWER.
4. Select a Manual cycle.
5. Press the Dry Time up or down buttons until the desired
drying time is displayed.
6. Press TEMPERATURE until the desired temperature glows.
7. Select the Options feature, if desired.
8. Press and hold START to begin.
5