Warning, Important safety instructions, Save these instructions – Whirlpool Cabrio W10150626A Manuel d'utilisation

Page 4

Advertising
background image

4

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

WARNING:

Read all instructions before using the dryer.

Do not place items exposed to cooking oils in your dryer.
Items contaminated with cooking oils may contribute to
a chemical reaction that could cause a load to catch fire.

Do not dry articles that have been previously cleaned in,
washed in, soaked in, or spotted with gasoline, dry-
cleaning solvents, or other flammable or explosive
substances as they give off vapors that could ignite or
explode.

Do not allow children to play on or in the dryer. Close
supervision of children is necessary when the dryer is
used near children.

Before the dryer is removed from service or discarded,
remove the door to the drying compartment.

Do not reach into the dryer if the drum is moving.

Do not repair or replace any part of the dryer or attempt
any servicing unless specifically recommended in this
Use and Care Guide or in published user-repair
instructions that you understand and have the skills to
carry out.

Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product.

Do not use heat to dry articles containing foam rubber or
similarly textured rubber-like materials.

Clean lint screen before or after each load.

Keep area around the exhaust opening and adjacent
surrounding areas free from the accumulation of lint, dust,
and dirt.

SAVE THESE INSTRUCTIONS

The interior of the dryer and exhaust vent should be
cleaned periodically by qualified service personnel.

Do not install or store the dryer where it will be exposed
to the weather.

Do not tamper with controls.

See installation instructions for grounding requirements.

IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54 or the Canadian Natural Gas and Propane Installation Code, CSA B149.1.

The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code, CSA C22.1.

Advertising
Ce manuel est liée aux produits suivants: