Windmere WCM2022C - Manuel (Page 3)

4 3
Product may vary slightly from what is illustrated.
† 1. Swing-out brew basket (Part# WCM2022C-01 )
† 2. Permanent nylon mesh filter (inside) (Part# WCM2022C-02)
3. Auto pause & pour (not shown)
4. Water window with level markings
† 5. 570 mL (4-cup) capacity glass carafe (Part# WCM2022C-03)
6. Power indicator light
7. ON/OFF (I/O) switch
8. Ergonomic carafe handle
†Consumer replaceable/removable parts
4
MAX
3
2







How to Use
This product is for household use only.
Coffee Filters
Your coffemaker comes with a permanent filter. You may use a Cone-shaped paper filter
if desired. Cone-shaped paper filters are available locally at grocery stores and where
coffee makers are sold. Standard #2 filters should be used.
The use of basket-style paper filters is not recommended, since they do not conform to
the shape of the Filter Basket and may cause coffee to back up and spill over during
brewing.
Before You Use Your Coffeemaker
Before preparing coffee in your new Coffeemaker, thoroughly clean the Carafe, Carafe
Lid and Removable Cone Filter Basket in hot, sudsy water. Rinse and dry. Replace
disassembled parts. Clean the inside of the Coffeemaker by brewing two full Carafes of
tap water (see BREWING INSTRUCTIONS below). Do not place coffee in Removable
Cone Filter Basket for this initial cleaning.
Note: At the end of first cycle, turn Coffeemaker off and wait ten minutes. Turn unit on
and brew second Carafe of water.
Brewing Instructions
1. Plug Coffeemaker into any 120 V AC electrical outlet.
2. Fill Carafe with cold tap water and pour into Water Window. Markings on the Carafe
indicate level of water required to brew desired number of cups. No less than two
cups is recommended.
Note: The amount of brewed coffee will always be less than the amount of water placed
into Coffeemaker, since about 10% is absorbed by coffee grounds and paper filter.
3. Place the Permanent Filter in the Swing-Out Filter Holder. Measure one level
tablespoon of drip or regular grind coffee for each cup of coffee desired. For stronger
or milder coffee, adjust amount of coffee to suit your taste.
4. Return Swing-Out Filter Holder to the closed position.
5. Place Carafe on Warming Plate.
6. Switch Power Select Button to ON (I).
7. If you wish to serve a cup of coffee before brew cycle is completed, simply remove
Carafe from Warming Plate. Dripping will automatically cease. Return Carafe to
position on Warming Plate within 20 seconds; dripping will resume.
8. Upon completion of the brew cycle, wait about one minute until the brew dripping
from the Removable Cone Filter Basket into the Carafe has stopped. Carafe Lid should
be kept in place to facilitate safe serving and help keep coffee at proper serving
temperature.
9. To keep coffee hot, return Carafe to the Warming Plate after serving. The Warming
Plate will automatically cycle to maintain ideal serving temperature as long as the
Coffeemaker is ON.
10. Switch Coffeemaker to OFF (O) when Carafe is empty or when unit is not in use.
11. To brew another Carafe of coffee, turn unit OFF and wait 10 minutes to allow
heating element to cool.