Whirlpool LSR6132EQ0 - Manuel (Page 6)

6
3. Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
• Your washer’s Load Size Selector has
two settings (see illustration).
• To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
4. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperatures with the type
of fabric and soils being washed.
• See page 14 for water temperature
guidelines.
• Your washer’s Water Temperature
Selector has three settings (see
illustration).
• The top temperature is the wash water
and the bottom temperature is the
rinse water.
5. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you
want. See page 7.
6. Pull out Cycle Control Knob to start
the washer.
7. (OPTIONAL STEP) If desired, add mea-
sured liquid chlorine bleach after the
washer starts agitating. See page 10.
8. (OPTIONAL STEP) If desired, add mea-
sured and diluted liquid fabric softener
to the final rinse cycle. See page 10.
O P E R A T I N G Y O U R W A S H E R
Small Large
Load Size
Temperature
Hot
Cold
Cold
Cold
Wash
Rinse
Warm
Cold