Disney DCR4500-P - Manuel (Page 10)

9
OPERATION (CONTINUED)
With the Function switch in the ON,
AUTO or BUZZ position, press and
hold the ALARM SET button; the
display will blink.
NOTE: You cannot set the alarm
time when the Function switch is set
to the OFF position.
1
1
While holding the ALARM SET
button
1 , press the HOUR button 2
to set the hour and/or MIN button 3
to set the minute of the alarm time.
Make sure the appropriate AM/PM
indicator is lit. Release the ALARM
SET button
1 ; after 4 seconds, the
alarm time will be set and the display
will show the actual time again
1
1
2
3
2
TO SET OR RESET THE ALARM TIME
Press and hold the TIME SET
button; the Time indicator ( ) and
the display will blink.
1
1
1
While holding the TIME SET button
1 , press the HOUR button 2 to set
the hour and/or MIN button 3 to set
the minute of the time. Make sure
the appropriate AM/PM indicator is
lit. Release the TIME SET button
1
and the time will be set.
1
1
2
3
2
TO SET OR RESET THE ACTUAL TIME