Windmere WCM2025C - Manuel (Page 3)

4 3
Product may vary slightly from what is illustrated.
† 1. Swing-out brew basket (Part# WCM2025C-01)
† 2. Permanent nylon mesh filter (inside) (Part# WCM2025C-02)
3. Water window with level markings
4. Auto pause & pour
† 5. 1.8 L (12-cup) capacity glass carafe (Part# WCM2025C-03)
6. Backlit ON/OFF (I/O) switch with power indicator
7. Ergonomic carafe handle
† Consumer replaceable/removable parts
How to Use
This product is for household use only.
Before You Use Your Coffee Maker
Before preparing coffee in your new Coffee Maker, thoroughly clean the Carafe, Carafe
Lid and Permanent Filter Basket in hot, sudsy water. Rinse and dry. Replace disassembled
parts. Clean the inside of the Coffee Maker by brewing two full Carafes of tap water
(see BReWIng InSTRUCTIOnS below).
NOTE: At the end of first cycle, turn Coffee Maker off and wait ten minutes. Turn unit
on and brew second Carafe of water.
Coffee Yield
12-Cup Coffee Maker: 12 (5 oz.) cups.
Note: A 5oz. cup is the American industry standard and is used by most Coffee Maker
manufacturers. To fill your favorite mug, fill Coffee Maker reservoir with enough water
for 2 cups (10 oz.).
Coffee Filters
Your coffee maker comes with a permanent filter. You may use a Cone-shape paper filter
if desired. Cone-shaped paper filters are available locally at grocery stores and where
Coffee Makers are sold. Standard #4 filters should be used.
The use of basket-style paper filters is not recommended, since they do not conform to
the shape of the Filter Basket and may cause coffee to back up and spill over during
brewing.
Brewing Instructions
1. Plug Coffee Maker into any 120 V AC electrical outlet.
2. Fill Carafe with cold tap water and pour into Water Chamber. Markings on the Water
Window indicate level of water required to brew desired number of cups. no less
than two cups is recommended.
Note: The amount of brewed coffee will always be less than the amount of water placed
into Coffee Maker, since about 10% is absorbed by coffee grounds and paper filter.
3. Place the Permanent Filter in the Swing-Out Filter Holder. Measure one level
tablespoon of drip or regular grind coffee for each cup of coffee desired. For stronger
or milder coffee, adjust amount of coffee to suit your taste.
4. Return Swing-Out Filter Holder to the closed position.
5. Place Carafe on Warming Plate.
6. Switch Power Select Button to On (I).
7. If you wish to serve a cup of coffee before brew cycle is completed, simply remove
Carafe from Warming Plate. Dripping will automatically cease. Return Carafe to
position on Warming Plate within 60 seconds; dripping will resume.
8. Upon completion of the brew cycle, wait about one minute until the brew dripping
from the Filter Holder into the Carafe has stopped. Carafe Lid should be kept in place
to facilitate safe serving and help keep coffee at proper serving temperature.
9. To keep coffee hot, return Carafe to the Warming Plate after serving. The Warming
Plate will automatically cycle to maintain ideal serving temperature as long as the
Coffee Maker is On (I).
12
11
10
9
8
7
6
MAX
5
4
3






