Whirlpool Cabrio W10164159A Manuel d'utilisation

Page 11

Advertising
background image

11

3. Connect ground wire (green or bare) of direct wire cable to

external ground conductor screw. Tighten screw.

4. Place the hooked ends of the other direct wire cable wires

under the outer terminal block screws (hooks facing right).
Squeeze hooked ends together. Tighten screws.

5. Tighten strain relief screw.

6. Insert tab of terminal block cover into slot of dryer rear panel.

Secure cover with hold-down screw.

7. You have completed your electrical connection. Now go to

“Venting Requirements.”

3-wire connection: Power supply cord

Use where local codes permit connecting cabinet-ground
conductor to neutral wire.

1. Loosen or remove center silver-colored terminal block screw.

2. Connect neutral wire (white or center wire) of power supply

cord to the center, silver-colored terminal screw of the
terminal block. Tighten screw.

3. Connect the other wires to outer terminal block screws.

Tighten screws.

4. Tighten strain relief screws.

5. Insert tab of terminal block cover into slot of dryer rear panel.

Secure cover with hold-down screw.

6. You have completed your electrical connection. Now go to

“Venting Requirements.”

3-wire connection: Direct Wire

Use where local codes permit connecting cabinet-ground
conductor to neutral wire.

Direct wire cable must have 5 ft (1.52 m) of extra length so dryer
can be moved if needed.

Strip 3

¹⁄₂" (8.9 cm) of outer covering from end of cable. Strip

insulation back 1" (2.5 cm). If using 3-wire cable with ground
wire, cut bare wire even with outer covering. Shape ends of wires
into a hook shape.

A. External ground conductor screw
B. Neutral ground wire

C. Ground wire (green or bare) of power supply cord
D. ¾" (1.9 cm) UL listed strain relief

E. Center silver-colored terminal block screw
F. Neutral wire (white or center wire)

A. 3-wire receptacle (NEMA type 10-30R)
B. 3-wire plug

C. Neutral prong
D. Spade terminals with upturned ends

E.

³⁄₄

" (1.9 cm) UL listed strain relief

F. Ring terminals

G. Neutral wire (white or center wire)

A

C

D

F

B

E

A

B

D

C

E

F

G

A. External ground conductor screw
B. Neutral ground wire

C. Center silver-colored terminal block screw
D. Neutral wire (white or center wire)

E.

³⁄₄

" (1.9 cm) UL listed strain relief

A

B

C

D

E

1"

(2.5 cm)

3

¹⁄₂

"

(8.9 cm)

Advertising