Whirlpool 3405792 - Manuel (Page 7)

7
Stopping/restarting your dryer
You can stop your dryer anytime during
a cycle.
To stop the dryer, either:
• Open the dryer door.
OR
• Turn the Cycle Control Knob
to Off.
NOTE: The Cycle Control Knob should point
to an Off area when the dryer is not in use.
Selecting the right cycle and setting
The following pages describe the cycles
on your dryer. Refer to the charts on pages
10-11 for help in selecting drying cycles.
Drying guidelines
• Always follow care label directions when
they are available.
• The last few minutes of all cycles are without
heat to make the load cooler to handle.
• To help reduce wrinkling, remove the load
from the dryer as soon as tumbling stops.
This is especially important for permanent
press, knits, and synthetic fabrics.
O P E R A T I N G Y O U R D R Y E R
Off
Off
To restart the dryer:
1. Close the door.
2. Select a new cycle and temperature
(if desired).
3. Push the Start Button.
• Overdrying can cause shrinkage, static
cling, and damage to some fabrics.
• Refer to pages 19-22 for information about:
– sorting clothes for drying
– choosing load sizes
– drying tips
– using dryer fabric softener sheets
– saving energy
– drying special-care items.