Timer, Control lock, Hour shut-off – Whirlpool GERC4110PB2 Manuel d'utilisation

Page 12: Oven temperature control

Advertising
background image

12

Timer

The Timer can be set in hours or minutes up to 12 hours and
0 minutes, and counts down the set time. The Timer does not
start or stop the oven.

To Set:

1. Press TIMER SET/OFF. The timer indicator light will light up

on some models. If no action is taken after 1 minute, the
display will return to the time of day.

2. Depending on your model, press the HR or MIN or TIME/

TEMP “up” or “down” arrow pads to set the length of time.

3. Press TIMER SET/OFF. When the set time ends, end-of-cycle

tones will sound, then, if enabled, reminder tones will sound
every minute on some models.

4. Press TIMER SET/OFF anytime to cancel the Timer and

reminder tones.

Remember, do not press the Off/Cancel pad because the
oven will turn off.

On some models, to display the time of day for 5 seconds when
the timer is counting down, press CLOCK.

Control Lock

The Control Lock shuts down the control panel pads to avoid
unintended use of the oven.

When the control is locked, only the CLOCK SET, OVEN LIGHT
(on some models) and TIMER pads will function.

To Lock/Unlock Control: Before locking, make sure the oven is
off. Press and hold “Lock” key for 5 seconds. A single tone will
sound, and “Loc” will appear on the display.

Repeat to unlock. “Loc” will disappear from the display.

12-Hour Shut-Off

The oven control is set to automatically shut the oven off
12 hours after the oven turns on. This will not interfere with any
timed or delayed cook function.

To Set: On some models, press and hold DELAY for 5 seconds.
12 HR SHUT-OFF ON will appear on the display. Press and hold
DELAY again for 5 seconds to turn off.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door may cause burner
cycling to give incorrect readings.

The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.

A minus sign means the oven will be cooler by the displayed
amount. The absence of a sign means the oven will be warmer by
the displayed amount. Use the following chart as a guide.

To Adjust Oven Temperature Calibration:

Style 1 - Electronic Oven Control

1. Press and hold OVEN LIGHT for 5 seconds until the oven

display shows the current calibration, for example, “0°F” will
appear on the display.

2. Press the TEMP “up” or “down” arrow pad(s) to increase or to

decrease the temperature in 10°F (5°C) amounts. The
adjustment can be set between 30°F (15°C) and
-30°F (-15°C).

3. Press START.

Styles 2 & 3 - Electronic Oven Controls

1. Press and hold BAKE for 5 seconds until the oven display

shows the current calibration, for example “0°F CAL” or “00.”

2. Press the TEMP or TEMP/TIME “up” or “down” arrow pad(s)

to increase or to decrease the temperature in 10°F (5°C)
amounts. The adjustment can be set between 30°F (15°C)
and -30°F (-15°C).

3. Press START.

ADJUSTMENT °F
(ADJUSTMENT °C)

COOKS FOOD

10°F (5°C)

...a little more

20°F (10°C)

...moderately more

30°F (15°C)

...much more

-10°F (-5°C)

...a little less

-20°F (-10°C)

...moderately less

-30°F (-15°C)

...much less

Advertising