Velodyne Acoustics CHT-12R - Manuel (Page 11)

10
10
should be set to achieve similar volume level from between both the
main speakers and subwoofer. When pressing volume up or down,
the speed at which the power light blinks indicates subwoofer volume
- the faster the blinking, the louder the unit plays.
Note: The volume can also be adjusted via the buttons on the back
panel of the subwoofer. These buttons have the same effect as
pressing the up and down volume buttons on your remote.
PRESETS - There are 4 presets, consisting of Movies, R&B – Rock,
Jazz – Classical, and Games. As a preset is chosen, the light flashes
the corresponding number of times. The presets provide the following
characteristics for bass reproduction:
Movies: Maximum output and impact for explosions
and other action adventure movie content.
R&B – Rock: Provides the driving bass found in today’s
rock music.
PHASE - These buttons allow you to optimize the subwoofer
performance for the location and your listening position. Select the
switch position at which you hear the most bass. The light will blink
according to the following schedule:
0 degrees 1 blink
90 degrees 2 blinks
180 degrees 3 blinks
270 degrees 4 blinks
LIGHT - If you wish, you can deactivate the power light on your CHT-R
unit. To do this, press the LIGHT button on your remote. The light will
turn off. To reactivate the light, press the LIGHT button again.
NIGHT - Night mode limits the maximum output of the subwoofer for
later night listening or to be more considerate of close neighbors.
Press the night button to turn the night mode feature on or off. Night
mode, when active, is indicated by the reduced intensity of the light.
VOLUME CONTROL - This control allows you to balance the output
from the subwoofer to the main speakers in your system. This control
Utilisation
Cette section traite de l’utilisation courante de votre caisson
d’e xtrê mes gra ves CHT -R.
Té lé commande
La figure 2 montre la té lé commande qui vous permet de choisir le
mode d’é coute que vous dé sirez.
Figure 2. Affichage à distance
POWER (alimentation) - Ce bouton force votre appareil CHT-R à
passer au mode d’attente. Le caisson d ’extr êmes graves ne jouera
pas et la DÉ L s’é teindra. L’appareil restera à ce mode jusqu ’à ce que
le bouton POWER soit enfoncé de nouveau. Pour bien dé sactiver (c.-
à-d., couper l ’alimentation), mettre l ’interrupteur marche-arr кt а arrê t
sur le panneau arriè re.
MUTE (silencieux) - Ce bouton assourdit le caisson d’extr êmes
graves. Le voyant sur le caisson d’extr êmes graves clignote