Victor Technology 1460-3 - Manuel (Page 6)

6
5. A02346F Decimal Point Selector
A Monetary Add Mode: At this setting, amounts entered are assumed to be
monetary. The calculator automatically supplies a decimal point to the left of
the last two digits entered. Use this setting to add, subtract, multiply and
divide decimals.
02346 Fixed decimal point mode; these settings specify the number of digits to the
right of the decimal point that are shown in the result.
F Floating decimal point mode; this setting specifies that all digits of the result
are shown, up to a maximum of 10 on model 1430-3, and 12 on model
1460-3. If the result exceeds these capacities, excess digits to the right of
the decimal point are dropped. No rounding takes place.
6.
↓ ↓ 5/4 ↑ ↑ Decimal Rounding Selector
↓ ↓
This causes automatic round down (truncation).
5/4 This setting causes automatic round off. If the last digit of the result that will
be printed or printed/displayed upon rounding is followed by a value of 0 to
4, the digit is unchanged. If the last digit of the result that will be printed or
printed/displayed upon rounding is followed by a value of 5 to 9, the digit is
rounded up.
↑ ↑
This setting causes automatic round up
7. NP P IC Printer Select Switch
NP Printer is activated only when feed key or non-add/date key is pressed.
P Printer is activated as long as calculator is turned on.
IC Activates item count to print.
8. [+/-] Sign Change Key
Reverse the sign on the display
9. [%] Percent Key
Completes percent calculation when Multiple or Division key is used.
10. [
∆ ∆ %]
Delta Percentage
Automatically compares any two amounts and then calculates and prints
the difference and percent of change.