UTStarcom PPC-6700 - Manuel (Page 19)

13 Section 1: Getting Started
1.4 Starting Up
Turn Your PPC-6700 On and Off
To turn on your PPC-6700, press the POWER button on the top of
the device. When you turn on the device for the first time, you are
asked to complete a calibration process. For more information,
see “Calibrate the Device” in this section.
To turn off the device, press POWER again.
Calibrate the Device
Calibrating the device screen involves tapping the center of a
cross with the stylus as it moves around the screen. This process
ensures that when you tap the screen with your stylus, the
tapped item is activated.
If your device does not accurately respond to screen taps, please
follow these steps to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, and follow the
instructions on the screen.
Buttons Lock
It is possible to lock the buttons on the device, so that the
applications may not be accidentally launched. Once you enable
this feature, only the Power button can turn on your PPC-6700.
To configure the Buttons Lock settings:
1. Tap Start > Settings > Personal
tab > Buttons.
2. On the Lock tab, select the Lock
all buttons except Power button
check box.
3. Tap OK.