Troubleshooting guide, Specifications, Accessory – Toshiba 20A43 Manuel d'utilisation

Page 13

Advertising
background image

13

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS

POSSIBLE SOLUTIONS

SYMPTOMS

POSSIBLE SOLUTIONS

TV does not
operate

Poor sound
or no sound

Poor picture
or no picture

Picture
wobbles or
drifts

Poor color or
no color

Poor
reception on
some
channels

• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off; check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.

• Station or CATV experiencing problems;

tune to another station.

• Check sound adjustments (VOLUME and

MUTE).

• Check for sources of possible interference.

• Station or CATV experiencing problems; tune

to another station.

• Make sure channels are set into memory.
• Check antenna or CATV connections; adjust

antenna.

• Check for sources of possible interference.
• Check picture control adjustments.
• Press CAP/TEXT to turn off the Closed

Caption mode.

• Station or CATV experiencing problems; tune

to another station.

• Make sure channels are set into memory.
• Station is weak; adjust antenna to receive

desired station.

• Check for sources of possible interference.

• Station or CATV experiencing problems; tune

to another station.

• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connection. Adjust

antenna.

• Station or CATV experiencing problems; tune

to another station.

• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Adjust antenna.

• Check all CATV connections.
• Set TV/CABLE menu option to the CABLE

mode.

• Station or CATV system problems; try

another station.

• Check antenna connections; reorient antenna.
• Check for sources of possible interference.

Horizontal or
diagonal bars
on screen

No reception
above
channel 13

No CATV
reception

• Batteries are weak, dead or inserted

incorrectly.

• Remote is out of range; move closer to TV

(within 15 feet).

• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between

the Remote and the TV.

• Make sure the power cord is plugged in.

• Make sure TV/CABLE menu option is in the

appropriate mode.

• If using antenna, check UHF antenna

connections.

No Remote
operation

• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.

• TV station experiencing problems or program

tuned is not closed captioned. Try another
channel.

• Check CATV connection or VHF/UHF

antenna, reposition or rotate antenna.

• Press CAP/TEXT to turn on the closed caption

decoder.

Closed -
Caption is not
activated

TV shuts off

• Press CAP/TEXT to turn off the Closed

Caption mode.

Black box on
screen

SPECIFICATIONS

AC Power Input:
AC Power Consumption:
Picture Tube:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
Receiving Channels:

Antenna Input Impedance:
Input:

Dimensions:

Weight:

120V, 60Hz
90 Watts
Type 20 (508mm diagonal)
2.5 + 2.5 Watts
2 inches (51mm) x 4-11/16 inches (119 mm) Full Range, 8 ohm x 2
181 Channel, Quartz PLL Frequency Synthesized
Infrared, Direct Access, 2 x AAA batteries (supplied)
VHF

2-13

UHF

14-69

CATV

01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)

75 Ohm (VHF/UHF) Coaxial Input
Video: 1.0 Vp-p 75 ohm
Audio: 300 mV, 47k ohm
Width: 23-1/4 inches (590mm)
Height: 17-9/16 inches (446.5mm)
Depth: 19-3/8 inches (492mm)
46.3 Ibs (21.0 kg)

Remote Control with two size “AAA” batteries

ACCESSORY

Design and specifications are subject to change without notice.

• Select proper language in the menu options.

Display is not
shown in
your language

3M90101A-E P12-BACK

20-3-03, 15:01

13

Advertising