Thermador PG36 - Manuel (Page 10)

Step 2: Cabinet Preparation
ELECTRICAL SUPPLY, ALL GAS RANGES
Installation of All Gas ranges must be planned so that the rough-in of the
junction box for the receptacle or conduit connection will allow maximum
clearance to the rear of the unit.
To minimize binding when the unit is connected to the receptacle or
junction box, orient the receptacle or conduit connector, and slide back
into position.
FIG. 3B Wall Connection
Power Cord & Receptacle Junction Box & Conduit
8
IMPORTANT
For all gas range models with electric griddle
(PG364GE, PG486GE, and PG484GGE),
dedicated 20 Amp service is required for proper
operation.