Toshiba SD-V594SC - Manuel (Page 23)

23
Connections
USER setting/operation Content of output for each output jack
Mode
VCR/DVD
HDMI
Output
*1
HDMI
Output
Setting
Video S-Video Component
RF
Modulator
VCR
VCR VCR
DVD
DVD
DVD
480p (DVD)
480i (DVD)
480p (DVD)
480i (DVD)
DVD
DVD
DVD
Off
Interlace
Progressive
Interlace
Progressive
Interlace
Progressive
Interlace
Progressive
480p
720p
1080i
480p
720p
Off
1080i
480p (DVD)
720p (DVD)
1080i (DVD)
480p (DVD)
720p (DVD)
1080i (DVD)
480p (DVD)
720p (DVD)
1080i (DVD)
480p (DVD)
720p (DVD)
1080i (DVD)
480p
720p
1080i
480p
720p
1080i
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Notes:
• When in DVD Mode/outputting HDMI signal, it is impossible to output any video images from either the Video out jack/S-Video
out jack/Component out jacks.
If the viewer would like to view videos using the Video out jack/S-Video out jack/Component out jacks, then the HDMI output must
set to “Off” by pressing the HDMI button on the remote control.
• When the HDMI Cable is connected, if the HDMI is pressed or the VCR Mode is switched to DVD Mode, there is a possibility that
the monitor will not show any output images. In this case, turn off the HDMI mode.
Deactivate HDMI output with HDMI (For details, please refer to “Switching the video quality (HDMI mode) using HDMI
button on the remote control”
).
• Refer to the Owner’s manual of the connected TV as well.
• When connecting the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
• If you have an HDMI (with HDCP) equipped monitor or display, you can connect it to the DVD/VCR using the HDMI cable.
• The HDMI connector outputs uncompressed digital video as well as almost every kind of digital audio that the DVD/VCR is compatible
with, including DVD-Video, Video CD, Audio CD and MP3/WMA/JPEG/DivX ® files.
• No sound will be output from the HDMI cable if the “Digital Out” is not set to “PCM” $% .
3 Picture Output
• DVD Mode
The following refers to instructions for Picture Output in DVD Mode.
There is no Analog Output (*2) for HDMI output.
When HDMI output setting is “Off”, there is no HDMI output.
*2: Output from Video out jack/S-Video out jack/Component out jacks
• VCR Mode
The following refers to instructions for Picture Output in VCR mode.
This set outputs the picture from the Video out jack in VCR mode. However, please see the following instructions for HDMI out
jack/S-Video out jack/Component out jacks.
<During HDMI Output>
DVD picture is always output from HDMI out jack during HDMI Output, but it cannot output from S-Video out jack/Component out
jacks during HDMI Output.
<When HDMI Output setting is “Off”>
When the HDMI output setting is “Off”, this set outputs picture signals as follows according to the HDMI Setting in the Setup
Menu. When HDMI Output setting is “Off”, HDMI output does not function.
When the Output setting is “Interlace”: Picture from VCR is output from the Video out jack
Picture from the DVD is output from the S-Video out jack/Component out jacks
When Output setting is “Progressive”: Picture from VCR is output from the Video out jack
NO OUTPUT from the S-Video out jack
Picture from the DVD is output from the Component out jacks
The content of the output for each output jack are as shown in the following table and differ depending on User settings/operation.
*1: Settings for HDMI output format are performed using the “HDMI” key on the remote control.
2I40301A-En_p18-27 21/3/06, 9:42 AM 23