Olympus W 10 - Manuel (Page 8)

8
Setting Time/Date (TIME)
Changing the Time/Date
Setting T
ime/Date (TIME)
If you have set the time and date, information as to when a file is recorded is stored automatically
with that file. The time and date should be set to ease file management tasks. The time and date
setting is also needed to perform the alarm playback function (
☞ P.20).
When you install batteries for the first time or each time you replace the batteries, the hour
indication will flash. In such a case, be sure to set the time and date by following steps 4
through 5 described below.
2,4
3,4
5
1
1 Press and hold the MENU/
FOLDER button for 1 second or
longer.
The menu opens (
☞ P.26).
2 Press the +/9 or –/0 button
until “TIME” flashes on the display.
3 Press the PLAY button.
The hour indicator flashes, indicating the
start of the Time/Date setup process.
4 Repeat steps
1 and 2 to set the
time and date:
1 Press the +/9 or –/0 to select a
value.
2 Press the PLAY button to set the
value.
• Time and date setup proceeds in the
order of hour, minute, year, month, and
date.
5 Press the STOP button.
The menu screen closes and “END”
flashes.