9colour and brightness, Volume punch-through, Auto scan – One for All URC-7562 Manuel d'utilisation

Page 9: Advanced features

Advertising
background image

W W W.ONEFORALL.COM

9

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR
ALL may operate the colour and brightness settings of your television.

Colour (+)

= Press and release MAGIC then hold Volume (+)

Colour (-)

= Press and release MAGIC then hold Volume (-)

Brightness (+) = Press and release MAGIC then hold Channel (+)
Brightness (-) = Press and release MAGIC then hold Channel (-)

Volume Punch-Through

You may be able to use some features of your Television, Video Recorder
and Satellite Receiver at the same time. If you're watching a programme on
your Video, you can adjust the volume (a TV function) without first pres-
sing the TV key. The chart below lists some of the possibilities:

Last Key Pressed:

You Can Control:

VCR

TV volume up and down, mute

SAT

TV volume up and down, mute

To punch through to TV Volume while in VCR, SAT or DVD mode press:
MAGIC* 9 9 3

TV key.

To punch through to AMP/TUN Volume while in CD mode press:
MAGIC* 9 9 3 AUD key.

To cancel the ”Volume Punch Through” press:
MAGIC* 9 9 3 Volume(+) (a device key will blink four times).

* Here you must hold down MAGIC until the device key blinks

twice.

Auto Scan

Your ONE FOR ALL 6 comes with a special Auto Scan function which lets
you “scan” through every programme available on your device.
For example, to scan the programmes on your TV:

1

Aim the ONE FOR ALL 6 at your TV. Press the TV key. Press and relea-
se MAGIC then press the MUTE key.

The ONE FOR ALL 6 will send the command to advance through all
the programmes available on your Television stopping at each pro-
gramme for about three seconds. Remember, you must aim the ONE
FOR ALL at your device the entire time you are using Auto scan.

2

When you find a programme you would like to watch, simply press
any key on the ONE FOR ALL key pad to stop the Auto Scan
feature.

Advanced Features

Important note: Auto Scan may not work with devices that did not have
programme +/- keys on the original remote control.

Note: You have 5 seconds to press the Volume or Channel keys for colour or
brightness adjustment after pressing MAGIC.

Advertising