Applying effects (effects/routing screen) – Roland ARX-01 Manuel d'utilisation
Page 28
28
fig.01-006.eps
Here you can specify each tone’s Comp Sw (p. 26), Mute Sw (p.
27), Reverb Send Level (p. 27), Pan (p. 27), Tone Level (p. 27), and
EQ gain (p. 26).
In the Effects/Routing screen you can make settings for multi-effect
(MFX) and reverb.
Adjusting the volume balance
of the tones (Mixer screen)
Applying effects
(Effects/Routing screen)
Parameter
Value
Description
MFX Type
0(THRU),
1–47
Selects the multi-effect type. For de-
tails on each type, refer to
MFX Output Level
0–127
Specifies the volume of the sound
that has passed through the multi-ef-
fect.
MFX Reverb Send
Level
0–127
Specifies the amount of reverb ap-
plied to the sound that has passed
through the multi-effect. Choose “0”
if you don’t want to apply reverb.
Reverb Type
0(OFF),
1(REVERB),
2(SRV ROOM),
3(SRV HALL),
4(SRV PLATE)
Selects the type of reverb. For details
on each type, refer to
Reverb Level
0–127
Specifies the volume of the sound
that has passed through the reverb.
ARX-01_e.book 28 ページ ２００８年２月１９日 火曜日 午後４時７分