NuTone ILF120 - Manuel (Page 2)

INSTALLATION IN EXISTING CONSTRUCTION
Installing in an existing building requires access to the attic or space
above the planned installation.
Carefully examine the installation area to be sure that;
1. Ducting can be installed.
2. Wiring can be run to the planned location.
3. No wiring or other obstructions might interfere with installation.
Install fan and ducting following the instructions in “Installation in a New
Construction Site”.
CARE AND MAINTENANCE
1. No regular maintenance is required.
2. For dryer booster applications periodically check the fan and discharge
vent for lint build up. Clean as needed.
Caution: Always disconnect power before inspecting.
FIGURE 3
CEILING JOIST
DAMPERED SLEEVE
INLET GRILLE
AIR FLOW
ROOF OR
WALL CAP
DUCTING INSTALLATION
FIGURE 2
WIRING CONNECTIONS
(POWER)
BLACK
(NEUTRAL)
WHITE
LI
N
(TO CAPACITOR)
WHITE
(where applicable)
(TO CAPACITOR)
WHITE
(where applicable)
(MOTOR)
BLUE
(MOTOR)
BLACK
BROWN