NuTone VSUC4RK - Manuel (Page 12)

Camera Wiring
An individual category 5 or category 6 cable must be connected from the camera to the TV/Monitor.
• Maximum cable length: 250 feet.
• Cable type: Category 5 or category 6
IMPORTANT: NuTone cannot be responsible for improper system operation that results from
interference generated by light dimmers, fluorescent lighting fixtures, and similar electrical
products. Such interference must be corrected at the source.
TO HELP REDUCE THIS INTERFERENCE, ALL WIRING CONNECTED BETWEEN THE CAMERA
AND TV/MONITOR MUST BE PLACED AT LEAST 12 INCHES FROM ANY A.C. POWER WIRING.
AVOID RUNNING INTERCOM WIRES PARALLEL TO A.C. POWER WIRING.
Maximum Number of Camera’s
The VSUC4RK is supplied with one (1) VSC4R camera. An optional second camera; NuTone model VSC4R recessed
mount camera, or VSC4S surface mount camera can be added.
IMPORTANT: Never use any camera other than NuTone models VSC4R and VSC4S or the
TV/Monitor will be damaged.
Wiring and Mounting the Camera
1. The VSC4R recessed camera is designed to mount in the VRC4R rough-in frame (purchased separately) at the time
of framing construction. At the same time the rough-in is installed, the category 5 or category 6 cable should be ran
from the camera rough-in location to the monitor location. Please refer to the instructions supplied with the VRC4R
rough-in and VSC4R camera, for mounting and wiring information.
2. At the VRC4R rough-in location, strip approx 2" of outer protective jacket from the category 5 or category 6 cable.
Telephone Connection
Plug the telephone cable (supplied) to the incoming telephone line jack and the TEL jack on the back of the TV/Monitor.
12