Specifications, Monitor multisync – NEC LCD1735NXM Manuel d'utilisation
Page 12
10
Specifications
Monitor
MultiSync
®
LCD
1735NXM
™
Notes
Specifications
Monitor
LCD Module with
Diagonal :
17.0 inch
Active matrix; thin film transistor (TFT)
Acrylic Panel
Viewable Image Size :
17.0 inch
liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count) :
1280 x 1024
pitch; 250cd/m
2
white luminence;
450:1 contrast ratio, typical
Input Signal
Video :
ANALOG 0.7 Vp-p/75 Ohms
Sync :
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors
16,194,277
Dependent on display card used.
Maximum Viewing
Left/Right :
80°/80°
(CR>5)
Angles with Acrylic Panel
Up/Down :
75°/70°
(CR>5)
Synchronization
Horizontal :
31.5 kHz to 80.0 kHz
Automatically
Range
Vertical :
56.0 Hz to 75.0 Hz
Automatically
Resolutions Supported
720 x 400*
1
:VGA text
Some systems may not support all modes listed.
640 x 480*
1
@ 60 Hz to 75 Hz
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768 @ 60 Hz to 75 Hz
1152 x 864 @ 75 Hz
1280 x 960 @ 60 Hz to 75 Hz
1280 x 1024 @ 60 Hz to 75 Hz ....................
Active Display Area
Horizontal :
337.9 mm/13.3 inches
Vertical :
270.3 mm/10.6 inches
Speakers
Practical Audio Output :
1.0W + 1.0W
Power Supply
100 – 240 V ~ 50/60 Hz
Current Rating
1A
Dimensions
337.6 mm (W) x 379.7 mm (H) x 175 mm (D)
14.9 inches (W) x 14.9 inches (H) x 6.9 inches (D)
Weight
10.4 lbs/4.7 kg
Environmental Considerations
Operating Temperature :
5°C to 35°C/41°F to 95°F
Humidity :
30% to 80%
Feet :
0 to 10,000 Feet
Storage Temperature :
-10°C to 60°C/14°F to 140°F
Humidity :
10% to 85%
Feet :
0 to 40,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
NEC-Mitsubishi Electronics Display cites
recommended resolution at 60 Hz for
optimal display performance.
LCD35Seriesmanual071904.p65
7/19/04, 7:24 AM
10