NuTone VSUC4SK - Manuel (Page 3)

3
Telephone
Number Keypad
Redial
Button
Telephone
Answer/Disconnect
On/Off
Volume
Up/Down
Channel
Up/Down
TV Screen
Door
Answer/Monitor
FM/AM
Play Record LCD Display Priority Call/Set
Seek
Up/Down
{
Monitor swings down for viewing
Monitor swings up when not viewing
Contrast Color Brightness
Remote Control
Operation
The remote control comes with a disc
battery (CR2025) that must be installed
prior to operating the remote control.
• Remove remote control from bag
• Remove battery and battery holder
from their bag
• Place battery with “+” side facing up
on the curved edge side of the battery holder
• Insert the battery holder in the bottom edge of the remote
control (it will only insert one way)
The remote control operation is easily accomplished by
using the device in place of the monitor’s buttons and
pointing at the view screen the desired function.
• To turn on the monitor’s power, Press the “Power” button
The monitor should power, if it had no power, or turn off if it
had power
• To answer the door , Press the “Door” button on the
remote control
The image from the camera should be on the view screen
and audio established with the camera location
• To turn on the TV, Press the “TV” button
• To increase/decrease the channel selected, Press the
“Channel Up/Down” buttons, or input the channel
number on the keypad
• To increase/decrease the volume level selected, Press
the “Volume Up/Down” buttons
• To Mute the sound, Press the “Mute” button
• To listen to the AM/FM radio, Press the “AM/FM button
• To change stations, Press the “Channel Up/Down” buttons
to manually tune to the desired station, or Seek Up/Down”
buttons to initiate the Seek function, or press the stored
memory location 1 – 9 on the keypad
• To activate the telephone, Press the “Tel” button to either
obtain dial tone or to hang up