Pioneer XW-HT1 - Manuel (Page 15)

Connecting up 03
15
En
English
Important
• When connecting, make sure that all
components are switched off and
unplugged.
• Do not use the supplied cords or AC
adapter for any other purpose than that
described here.
1 Connect the DVD IN jacks on the
transmitter to a set of stereo output jacks
on your DVD player.
Use a commercially available RCA/phono
stereo audio cable to do this.
2 Connect the TV OUT jacks on the
transmitter to the stereo audio input jacks
on your TV.
Use the supplied RCA/phono stereo audio
cable to do this.
3 If you have a subwoofer, connect the
SUBWOOFER OUT jack on the transmitter
to the input jack on your subwoofer.
Use a commercially available RCA/phono
mono audio cable to do this.
• If you don’t own a subwoofer, you can
omit this step and still achieve convincing
surround sound from your system.
• Please refer to the operating instructions
supplied with your subwoofer when
connecting.
4 Connect the supplied AC adapter to
the DC IN inlet on the rear panel of the
transmitter, then plug into a power
outlet.
5 Connect the wireless speaker AC
power cord to the AC IN inlet on the rear
panel of the wireless speaker, then plug
into a power outlet.
En_XW-HT1.book 15 ページ ２００４年６月２４日 木曜日 午後５時１０分