Panasonic TC 26LX50 - Manuel (Page 10)

10
S-VIDEO
VIDEO
VIDEO
Y
P B
P R
L
R
AV IN
R L
AUDIO
HDMI AUDIO IN
HDMI IN
HDMI OUT L R
AUDIO
OUT
Connections
HDMI Connection
Notes:
• This input terminal is not intended for use with computers.
• 720p/1080i signals will be re-formatted for viewing on your LCD display.
Compatible VIDEO Signal
Set-Top Box
DVD player
AUDIO cable
HDMI cable
Example of HDMI input signal source
720p
1080i
480p
480i
No. of dots (H
× V)
1,280
× 720p
1,920
× 1,080i
720
× 480p
640
× 480p
720
× 480i
Vertical scanning frequency (Hz)
59.94/60
59.94/60
59.94/60
59.94/60
59.94/60
Notes:
• This HDMI connector is Type A.
• If you connect equipment without a digital output terminal, connect to the COMPONENT VIDEO, S-VIDEO or
VIDEO input terminal on the TV so you can receive an analog signal.
• The HDMI IN terminal can only be used with 720p, 1080i, 480i or 480p picture signals. Set the Digital Set -
Top Box DIGITAL OUT terminal Output setting to 720p, 1080i, 480i or 480p. For detailed information, refer to
the Digital Set -Top Box instruction manual. If you cannot display the picture because your Digital Set -Top
Box does not have a DIGITAL OUT terminal Output setting, use the component Video Input (or the S-Video
Input or Video Input). In this case the picture will be displayed as an analog signal.
Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48 kHz / 44.1 kHz / 32 kHz
∗
1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
∗
2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video
including high bandwidth digital content protection.
∗
3. Consult your consumer electronics dealer for availability details.
[for USA]
HDMI-DVI conversion cable (TY-SCH03DH): available on Panasonic website (www.panasonic.com).
HDMI∗ 1 (High Definition Multi media Interface) is the first all-digital consumer electronics A/V interface that
supports uncompressed standard. The HDMI terminal supports both video and audio information.
To the HDMI∗
1 input terminal, you can connect an EIA/CEA-861/861B∗ 2 compliant consumer electronic device,
such as a Set Top Box or DVD player with HDMI or DVI output terminal.
Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to this HDMI terminal,
so you can display high-definition pictures on this TV in digital form.
• An audio cable should be connected only when using an HDMI conversion
adapter to connect with a DVI cable.
• If the external device has DVI output only, use a DVI to HDMI adapter cable∗ 3
to connect to the HDMI terminal.
• Connect the audio cables to the AUDIO IN terminals for HDMI.
• Select the audio setting in HDMI In (see page 25).